Project Detail

Home – Project Detail

The SEG1K0100A2 is a DC charging module that adopts patented circuit design and innovative technology. It features a wide constant power voltage range, high efficiency, high power factor, high power density, high protection performance, high reliability, low noise, and low harmonics, meeting the fast charging requirements of various electric vehicles. The SEG1K0100A2 adopts a three-phase AC input without a neutral wire, with a DC output voltage range of 50V to 1000V and an output power of 30KW. It is a charging module of international leading level.

 

Unique Features:

  • Air duct optimization and potting: The air duct optimization design improves heat dissipation efficiency, and the potting process significantly enhances the module’s protection capabilities against salt spray, moisture, and mildew.
  • Wide DC output voltage range: 50Vdc – 1000Vdc, meeting the fast charging needs of various electric vehicles and battery packs.
  • Wide constant power output range: 300Vdc – 1000Vdc constant power output, meeting the constant power charging needs of various electric vehicles.
  • Ultra-low standby power consumption: Less than 9W.
  • Built-in intelligent discharge circuit: Automatically discharges residual charge, simplifies system design, and improves system safety.
  • High efficiency across the full load range: Operates with high efficiency across the full load range, with higher efficiency at full load.
  • Wide temperature range: -40°C to +75°C, with derating output above +55°C, adapting to applications in various scenarios.

Main Features:

  • Energy conservation and environmental protection: High-efficiency operation across the full load range and ultra-low standby power consumption, with a maximum efficiency of 96%, effectively reducing energy loss and achieving energy conservation and environmental protection.
  • Wide input voltage range: AC 260Vac – 530Vac, adapting to various power grid environments.
  • Three-phase offline AC input: Simplifies system design, eliminates the risk of excessive neutral line current, and reduces system costs.
  • Full digital control: Dual DSP design realizes full digital control of the charging module, ensuring high control reliability.
  • Battery anti-backflow: Effectively protects the battery while ensuring safe and reliable system operation.
  • Ultra-high power density: 49.4W/in³, saving space inside the charging pile and reducing the footprint of the charging pile.
  • Complete certifications: Passed certifications from CEPRI/State Grid Electric Power Research Institute.

Application Scenarios:

  • Various standard charging equipment in domestic and international markets.
  • High-voltage electric vehicles.
  • Charging equipment for electric forklifts and electric tractors.
  • Super standard charging piles.

Technical Parameters

Working Environment Conditions

  • Operating temperature: -40°C ~ +75°C, derate above +55°C
  • Storage temperature: -40°C ~ +80°C
  • Relative humidity: ≤95% RH, no condensation
  • Cooling method: Forced air cooling
  • Altitude: ≤2000m; derating considerations required above 2000m

AC Input

  • Input voltage range: 260Vac~530Vac, three-phase without neutral line
  • Maximum input current: 58A
  • Frequency range: 45Hz~65Hz
  • Power factor: ≥0.99
  • Efficiency: 95.5%
  • THD: <5%

DC Output

  • Output power: 30kW
  • Voltage range: 50Vdc-1000Vdc, with voltage adjustment step of 0.1Vdc
  • Constant power output voltage range: 300Vdc-1000Vdc
  • Output current: 0-100A
  • Output current limiting: Continuously adjustable from 0.3-100A
  • Current sharing: Imbalance <±5%
  • Voltage regulation accuracy: <±0.5%
  • Current regulation accuracy: ≤±1% (within 20%~100% of rated output load range)

Monitoring

  • Communication method: CAN bus
  • Indicator lights: Green – normal operation; Yellow – protection alarm; Red – fault alarm

Alarms and Protections

  • Input over/under-voltage protection: Automatic shutdown protection; command to start after input returns to normal
  • Output over-voltage protection: Automatic shutdown protection; command to start
  • Over-current and short-circuit protection: Automatic shutdown protection; command to start
  • Over-temperature protection: Automatic shutdown protection; command to start after temperature returns to normal

Product Reliability and Safety Regulations

  • Mean Time Between Failures (MTBF): >500,000 hours

Dimensions and Weight

  • Dimensions: 84mm (height) × 300mm (width) × 395mm (depth) (excluding handles and protruding parts of terminals)
  • Weight: ≤15kg

*The product is constantly being innovated. If there are any changes in specifications, no prior notice will be given.

Project Overview

SunCare Hospital, a leading healthcare institution committed to sustainable operations and patient well-being, partnered with us to transition its energy source to solar. The project involved the full design and installation of a customized solar power system to reduce operating costs, increase energy reliability, and support the hospital's green initiatives.

Project Objectives

This project was designed to meet the hospital’s energy needs while promoting sustainability, reducing costs, and ensuring uninterrupted service for patients and essential medical operations.

Key Results & Benefits

What We Delivered

We provided a complete solar solution tailored to the hospital’s needs, ensuring performance, safety, and long-term energy savings without disrupting daily operations.

Custom Energy Assessment

We analyzed usage patterns and infrastructure to design a system that meets specific energy needs.

Seamless Installation Without Disruption

Our team installed efficiently with zero interruption to hospital operations and strict safety procedures.

Tailored Solar System Design

We created a solar layout that maximizes efficiency while matching the hospital’s structure and goals.

Reliable Backup and Monitoring System

We integrated smart monitoring and backup support to ensure continuous power for critical medical equipment.

Our Impact

This project is more than just an energy upgrade, it is a commitment to health, sustainability, and community leadership. The SunCare Hospital solar installation reflects how renewable energy can enhance essential services without compromise.

Client Testimonial

"Working with Solarize was a smooth experience. Their team truly understood our hospital’s needs and delivered a solution that saves energy, ensures reliability, and supports our long-term sustainability goals."

Dr. Lisa
Director of Operations, SunCare Hospital
Other Projects

Energizing Communities Through Innovation

Solarize brings cutting-edge clean energy solutions to life, empowering homes, businesses, and public spaces with sustainable power that transforms everyday living.

BrightMall Complex

Location: Lisbon, Portugal
Solar rooftop installation across a large-scale shopping mall to reduce grid dependency and promote sustainable retail operations. Integrated with smart energy monitoring for maximum efficiency.

SunCare Hospital

Location: Melbourne, Australia
Development of a solar-battery hybrid system for uninterrupted power in critical hospital zones, including ICUs and emergency rooms. Designed to meet high safety and reliability standards.

EcoBank Tower

Location: Nairobi, Kenya
Solar façade and rooftop system installed on a 20-story corporate office building, integrated with energy-efficient HVAC systems to reduce operational carbon footprint.

GreenForge Factory

Location: Hamburg, Germany
Large-scale solar installation for a metal fabrication plant, optimized to meet industrial energy demand while supporting Germany’s renewable transition goals. Includes automated load balancing.